The Facts And Fiction About Infrared Patching

The Facts And Fiction About Infrared Patching

The Infrared Patching process is one of the newest, most innovative, and cost-effective methods for repairing asphalt. The process involves heating and liquifying asphalt to provide the intense heat required to create the necessary conditions for this type of repair. Homeowners and commercial entities choose infrared patching when things take a turn for the worse and require emergency repairs.

Unfortunately, there are a lot of misconceptions regarding infrared patching. It is a relatively new process used for asphalt repair and maintenance. This blog post will discuss some facts about infrared patching and debunk some popular myths to give you a clear picture of the latest addition to the field of pavement repair.

Myth: Infrared Patching is Just a Quick Fix for Poor-Quality Asphalt

Fact: Infrared patching is used to patch and repair roads across the country, including some of America’s most heavily traveled roads. Its performance proves that infrared patching can pave cracks up to one inch wide without affecting the structural integrity or lifespan of an asphalt pavement. As a result, many professional paving companies, such as Doctor Asphalt LLC, serving clients in Wisconsin, Texas, and St. Paul, MN, use infrared patching for asphalt repair and maintenance.

Infrared repair is also great for repairing potholes before they get too big and expensive to repair. Though infrared pavement maintenance isn’t always successful at getting rid of all surface irregularities, such patches are often temporary solutions until more permanent repairs are performed later when resources become available.

Myth: Only Works for Large Cracks

Fact: Although this is true for the initial versions of infrared patching, the newer offerings also work with minor cracks. Infrared patching can repair cracks as small as a quarter of an inch. This makes infrared patching more than just an emergency repair measure.

Myth: Infrared Patching is Quick

Fact: Infrared patching takes longer than traditional methods. Infrared patches may take up to 24 hours before they are fully cured and ready for traffic. Cold patched asphalt, on the other hand, is usable in minutes.

Myth: It’s Painful or Uncomfortable to Walk on the Patched Area Afterward

Fact: If a person walks over the infrared patch before it has fully cured, then yes, this could happen; walking around on the area after full cure time has passed should not result in any discomfort at all, though!

Myth: Infrared Patching Ruins Finished Surfaces and Sealants

Fact: The infrared heating process doesn’t penetrate the surface to affect finished surfaces; any sealant applied prior will remain intact in its original form when complete! If you notice your sealed area turning brown during the curing process, consider using blacktop instead of red flagging tape.

If you’re looking to restore your pavement in St. Paul, MN, then Doctor Asphalt LLC is the right choice for you. We offer quality infrared patching services to help in asphalt maintenance and repair. Get an estimate for our services now and see the results for yourself.